Hydraulic fixture clamp arm milled from 4140 steel: a stepped block with a clevis slot and rounded nose at the arm end, two H7 pin bores (D and E) through the width, a metric tapped mounting hole (F, M6-M20) in the underside of the heel, and an optional 45 degree heel chamfer. Black oxide or as machined. Drawing dimensioned in millimetres.
About this part
Configurable dimensions
Clamp Length: 2.165354 – 11.811024 in
Clamp Body Height: 0.590551 – 3.937008 in
Clamp Body Width: 0.393701 – 1.968504 in
Chamfer Size: 0 – 1.771654 in
Slot Length: 0.393701 – 1.968504 in
Slot Thickness: 0.19685 – 0.787402 in
Slot Depth: 0.393701 – 1.771654 in
Step Length: 0.590551 – 11.338583 in
Step Height: 0.003937 – 2.952756 in
Hole D Diameter (H7): 0.19685 – 0.984252 in
Hole E Diameter (H7): 0.19685 – 0.984252 in
Hole D Position: 0.177165 – 0.984252 in
Hole E Position: 0.551181 – 2.952756 in
Hole E Height: 0.07874 – 0.984252 in
Hole F Position: 0.787402 – 11.614173 in
Options
Material: 4140 Steel
Color: Black Oxide, None
Hole F Thread: M6 x 1.00, M8 x 1.25, M10 x 1.50, M12 x 1.75, M16 x 2.00, M20 x 2.50