Milled 4140 steel clamp arm for hydraulic fixtures: a stepped rectangular block with a 45 degree top chamfer, a radiused step, a forked slot at the working end, two H7 cross holes for the pivot and cylinder pins, and a tapped metric mounting hole. Every dimension configurable; black oxide or bare.
About this part
Configurable dimensions
Clamp Length: 2.1653543 – 11.8110236 in
Clamp Body Height: 0.5905512 – 3.9370079 in
Clamp Body Width: 0.3937008 – 1.9685039 in
Chamfer Size: 0 – 1.7716535 in
Slot Length: 0.3937008 – 1.9685039 in
Slot Thickness: 0.1968504 – 0.7874016 in
Slot Depth: 0.3937008 – 1.7716535 in
Step Length: 0.5905512 – 11.3385827 in
Step Height: 0.003937 – 2.9527559 in
Corner Radius: 0.2755906 – 3.5433071 in
Hole D Diameter (H7): 0.1968504 – 0.984252 in
Hole E Diameter (H7): 0.1968504 – 0.984252 in
Hole D Position: 0.1771654 – 0.984252 in
Hole E Position X: 0.5511811 – 2.9527559 in
Hole E Position Y: 0.0787402 – 0.984252 in
Hole F Position: 0.7874016 – 11.6141732 in
Options
Material: 4140 Steel
Color: Black Oxide, None
Hole F Thread: M6 x 1.00, M8 x 1.25, M10 x 1.50, M12 x 1.75, M16 x 2.00, M20 x 2.50